Corporate HDQ:

ETAS Corporation
2616 S. Loop W.
 (I-610 Freeway)
Suite 595
Houston, TX 77054

Office: (713) 569-5582
Fax: (713) 349-0683

 sales@etascorp.com

Physical/Chemical Technologies

   Flocculation and Sedimentation: Prj-157

Services Provided

Waste Processing and Treatment
Waste Minimization

Technologies Used

Low Temperature Thermal Processing
High Temperature Thermal Treatment
Vapor Recovery, 3-Phase Separation
Chemical Pretreatment
Flocculation and Sedimentation
Activated Carbon Absorption
DAF Oil-Water-Sludge Separation

Relevance

Sludge
Hazardous, Refinery
Design-Fabrication Mobile Systems
Turn-Key Waste Treatment Operation
Commercial Client
Integrated Safety Management
Level C PPE
SPCC, WMP, HASP, SAP, QAPjP

Accomplishments

Rendered hazardous waste
    non-hazardous
Quality services through innovation
Cost saving through creativity

Title: Processing and Thermo Treatment of F- and K-Wastes

Client: Conoco Refinery
Ponca City, Oklahoma

The objective of this project was to remove and process oil and water laden oil refinery tank sludge containing RCRA F- and K-wastes. To complete this project, ETAS Corporation employed three mobile treatment systems, consisting of a thermo-desorber, a material cooler, and an oil-water separator with physical and chemical treatment capabilities (spray tower stripper, chemical reactor, and activated carbon absorption). Approximately 500 cubic yards of sludge were removed from the refinery tanks and successfully treated to remove all hazardous waste constituents from the solids to meet the Universal Treatment Standards, recover the oil, and provide pre-treatment of the wastewater prior to discharge to an on-site Dissolved Air Floatation (DAF)/Biological Wastewater Treatment Plant. The project requirements included acquiring necessary permits and preparation of all appropriate work plans, including the sampling and analysis plan (SAP), health and safety plan (HASP), quality assurance project plan (QAPjP), spill prevention and contamination control (SPCC) plan, and waste management plan (WMP).

Accomplishments: With this project, ETAS Corporation demonstrated our ability to turn technical obstacles into creative solutions. First, we modified the ETAS mercury retort equipment to process refinery wastes and the recovered wastewater. We then developed on-site analytical testing methods to save significant amounts of laboratory analytical expenses for our customer, and finally, we enhanced the effectiveness of a solid-liquid separator for wastewater treatment.

Back

Next

[Home] [Clients] [ETAS News] [Employment] [Contact]

©Copyright 2008 ETAS Corporation.
All rights reserved.